Graver Resin Bonded Filter Cartridges (RTEC)
General Description
RTEC Series filters feature an acrylic fiber/phenolic resin
construction that produces an extremely rigid pore structure.
This construction allows the filter to withstand extremes of
viscosity and temperature without compression or collapse. In
addition, a true graded density construction allows complete
utilization of the filter’s depth, with coarse particles captured
in the outer zones and finer particles captured nearer the
core.
- Rigid acrylic fiber/phenolic resin construction prevents unloading even at high differential pressures
- Grooved outer surface increases surface area for longer on-stream life
- Available in a wide range of removal efficiencies from 1 to 100 microns
- Available with optional end configurations for installation in most housings
- No metal or plastic cores for easier disposal
- Broad chemical compatibility
Specifications
Specifications | |
---|---|
Recommended Change-out D.P. | 2.4 bar |
Max. D.P. | 4.8 bar | Max. Temperature | 122 °C |
Grades | 1, 3, 5, 10, 25, 50, 75, 100 |
Media | Acrylic Fiber/Phenolic Resin |
Optional End Caps | Polyester |
Multi length bonding agent | Polyamide Hot Melt |
Gasket/O-Rings | Silicone, EPDM, Buna N, Viton and Teflon encapsulated Viton (o-rings only) |